Sheet metal fabrication
Blanks, formed parts, enclosures and fabricated assemblies
Sheet metal fabrication and metal stamping in China: laser-cut blanks, stamped and formed parts, enclosures and welded assemblies.
Our sheet metal fabrication services cover cut blanks, formed parts, enclosures, brackets and fabricated assemblies, combining processes to suit prototype quantities or repeat production.
Fabrication planning accounts for how cutting and forming affect the finished component, including bend geometry, joining locations and assembly interfaces. Parts can proceed to welding, deburring, surface preparation and coating before final inspection and packing.
Cutting
- Laser cutting
- Waterjet cutting
- Plasma cutting
Forming and presswork
- Stamping and punching
- Bending
- Deep drawing
- Stretch forming
- Roll forming
Sheet metal and stamping at a glance
| Cutting | Laser, waterjet and plasma cutting |
|---|---|
| Forming | Stamping and punching, bending, deep drawing, stretch forming and roll forming |
| Products | Cut blanks, formed parts, enclosures, brackets and fabricated assemblies |
| Follow-on | Welding, deburring, surface preparation and coating |
| Tooling | Stamping dies from our own tool room |
| Quantities | Prototype quantities or repeat production |
Sheet metal: frequently asked questions
Do you make sheet metal prototypes as well as production parts?
Yes. Laser, waterjet or plasma cutting with bending suits prototypes and small runs; stamping with dedicated dies suits repeat production.
Can you weld and coat sheet metal parts?
Yes, parts can go on to welding, deburring, surface preparation and coating before final inspection and packing.
Do you build the stamping dies?
Yes, stamping dies are designed and built in our own tool room.